|
|
 |
SEMI VERTICAL CYCLE RACKS
|
|
|
|
|
|
MINIMUM FLOOR AREA, IDEAL FOR CONFINED SPACES.
CYCLE RAILS SUITABLE FOR BOTH STANDARD AND MOUNTAIN BIKES.
Easy to position cycles in rack using run-up trough.
Front wheel is ‘captured’ until user lifts cycle out, thus minimising risk of accidentally dislodging cycles.
Welded steel construction, weatherproof galvanised finish.
Base and rear frame predrilled for fixing to ground and/or wall.
Cycle rails arranged in high/low positions at 300mm centres to minimise rack width.
Single sided racks hold 3, 4, 5, and 6 cycle capacities.
Double sided racks hold 2 rows of cycles meeting at the apex in centre holding 6, 8, 10, or 12 cycles.
Supplied in knock-down format for on site assembly.
|
Single Sided |
Double Sided |
| No of Cycles Stored |
3 |
4 |
5 |
6 |
6 |
8 |
10 |
12 |
| Rack Height mm |
1245 |
1245 |
| Rack frame Depth mm |
1067 |
2134 |
| Rack Width mm |
900 |
1200 |
1500 |
1800 |
900 |
1200 |
1500 |
1800 |
| Rack Reference |
40077-8 |
40075 |
40072-3 |
40070 |
400878 |
40085 |
400823 |
40080 |
Please note: these racks are unsuitable for cycles with full mudguards but will accept small splash guards front and / or rear
|
|
|
|
|
|
|
